Our Services

We service many softeners all across the London and south east. We recently have started a water softeners installation phase at Eastmands village in Harrow where we have been fitting Water 2 buy softeners.

W2b800 rhino plumbing

£995.00

(includes installation)

  • W2B800 provides complete limescale-free water for a family of 10.
  • Generates approximately 4000 litters of filtered soft water every day, for both city and well water.
  • Suitable for installation in a garage or basement.
  • Easy DIY fitting or installation service available.
  • The W2B800 comes with a 1″(28mm) HIGH FLOW connection fittings & 1” internal bore tube size inside water softener
  • Automatic self cleaning & Manual override
  • The pre-fitted bypass valve will maintain optimal water pressure throughout your home.
  • Equipped with an efficient digital meter control so it consumes less salt and water.
  • Adjustable water hardness.
  • Use the free Water2Buy easyConnect app for easy setup.
  • Prefilled premium-grade ionX resin, Built to last, high strength corrosion resistant fiberglass and polyethylene tank.

wb500 rhino plumbing

£899.00

(includes installation)

  • W2B500 provides complete limescale-free water for a family of 7.
  • Generates approximately 1,700 litres of filtered soft water every day, for both city and well water.
  • Suitable for installation in a garage or basement.
  • Easy DIY fitting or installation service available.
  • The W2B500 comes with a 3/4inch (22mm)
  • HIGH FLOW connection fittings & 1” (28mm) internal bore tube size inside water softener
  • Automatic self cleaning & Manual override
  • The pre-fitted bypass valve will maintain optimal water pressure throughout your home.
  • Equipped with an efficient digital meter control so it consumes less salt and water.
  • Adjustable water hardness.
  • Use the free Water2Buy easyConnect app for easy setup.
  • Prefilled premium-grade ionX resin, Built to last, high strength corrosion resistant fiberglass and polyethylene tank.

Water installation kits

Connection hoses are needed, we recommend steel braided flexible hoses. You’ll need 2 hoses one in and one out. The first hose connects your mains hard water supply to your water softener. The second returns soft water from your water softener to your water system. Buy the same size hoses as your pipes.E.g. If you have 3/4 in pipes, then buy 3/4 hoses and connect them to 3/4 water softener connection fittings.

Water Softener Connection Fittings. The fittings on a water2buy softener are inexpensive and interchangeable. So you can buy different size fittings if you need to. This makes Water2Buy water softeners compatible with all plumbing. Water2Buy water softeners come with 1 set of fittings included, check the listing for the size included.

You will need a waste pipe, the water softener flushes brine out of the waste pipe during its Regeneration.

Over flow pipe, Overflow pipes allow water to overflow to a safe location in case of a malfunction.

By-pass valve. Your local plumbing code may require you to install a by-pass valve before your water softener. A by-pass valve allows you to by-pass the water softener in the event of a problem. Water2Buy Models (W2B180, W2B200, W2B500, W2B780, W2B800) come with a free by-pass valve pre fitted so there is no need to purchase an extra valve or mounting block

Salt. Your water softener consumes Water2Buy Crystal salt. You can buy or subscribe to Water2buy salt.

Combi-boilers and pressure: Water softeners so not have an effect on water pressure so they can be installed with a combi-boiler.

Noise: Water softeners don’t make any noise while in normal softening mode, during regeneration they make a noise similar to a dish washer

Regeneration of water softener

Timer’ or ‘Meter’ refers to the regeneration type. A Timer water softener regenerates every few days regardless of water usage. So a timer will always regenerate and use salt even if it’s capable of producing more soft water. This means a timer uses more salt and water than a meter. A Meter Softeners measures your water usage and counts down the soft water capacity it has left. It only performs a regeneration when there is no softening capacity left, making it more efficient.

 

Three way tap installs

From £190.00

For filter clean drinking water.

Any other water softeners will be a different cost as all manufacturers are different

Water 2 buy wb200

£699.00

(includes installation)

  • W2B200 provides complete limescale-free water for a family of 5.
  • Generates approximately 1,500 litres of filtered soft water every day, for both city and well water.
    Suitable for installation in a garage, basement or kitchen cupboard.
  • Easy DIY fitting or installation service available.
    The W2B200 comes with a 3/4″(22mm) High Flow connection fittings & 1”(28mm) internal bore tube size inside water softener
  • Automatic self cleaning & Manual override
  • The pre-fitted bypass valve will maintain optimal water pressure throughout your home.
  • Equipped with an efficient digital meter control so it consumes less salt and water.
  • Adjustable water hardness.
  • Use the free Water2Buy easyConnect app for easy setup.
  • Prefilled premium-grade ionX resin, Built to last, high strength corrosion resistant fiberglass and polyethylene tank.

Water 2 buy 110 Unit Water Softener

£599.00

(includes installation)

  • Brand Water2Buy
  • Colour Green, White
  • Condition New
  • EAN 5060299260078
  • Manufacturer Warranty 7 years from date of purchase
  • Model W2B110
  • Certification NSF, FDS, ISO 9001& 14001, CE, Qualitas
  • Item Depth 425 mm (17 Inch)
  • Item Height 650 mm (26 Inch)
  • Item Width 220 mm (9 Inch)
  • Voltage (V) 12
  • Water Consumption (l) 150

Our Partners

Put You & Your Family in Good Hands

Get In Touch

Please do not hesitate to contact us for a no obligation quote.